247 found, showing page 1 of 17
Cutler-Hammer CHFCAF120 Circuit Breaker, AFCI, Type CH, 20 A, 1-Pole, 120/240 V, Plug
PRODUCT OVERVIEW
The National Electrical code requires all circuits feeding dwelling areas in residential structures to be protected by combination type arc fault circuit interrupters. Eaton's type CH (3/4 in) combination AFCI is available in 15 and 20 A configurations. Eaton has also included a diagnostic LED as a standard feature in the CH AFCI which indicates the most recent trip code to assist in troubleshooting.
Product Details
Actuator Type:Toggle
Current Rating:20 A
Dimensions:6 in L x 3-1/2 in W x 1-1/4 in H
Interrupt Rating:10 kA
Mounting Type:Plug
Number of Poles:1
Operating Frequency:60 Hz
Type:AFCI Type CH
Voltage Rating:120/240 V
Wattage Rating:0.75 W
Features
Arc fault detection methodology tolerant of non-compliant devices
Lifetime trip code retention
Overvoltage protection
Continuous self-test of electronic components
Diagnostic LED to access most recent trip code
Two position, trip to OFF handle
View Details
$99.99
Cutler-Hammer CL230 Circuit Breaker, Type CL, 30 A, 2 -Pole, 120/240 V, Common Trip, Plug Mounting
PRODUCT OVERVIEW
Wire size range #14 to 4. Type CL replacement breakers, classified as direct replacements by Underwriters Laboratories for Square D Homeline, General Electric, Crouse-Hinds, Thomas and Betts, Murray and ITE/Siemens load centers 120/240 VAC, 10,000 AIC. 1 per pole.
Product Details
Actuator Type:Magnetic Thermal
Current Rating:30 A
Dimensions:3 in L x 2 in W x 3 in H
Interrupt Rating:10 kA
Mounting Type:Plug
Number of Phases:1
Number of Poles:2
Operating Frequency:50/60 Hz
Operating Temperature:60 to 75 deg C
Suitable for:Square D HOMELINE General Electric Crouse-Hinds Thomas and Betts Murray and ITE/Siemens Load Centers
Trip Type:Common
Type:Type CL
Voltage Rating:120/240 V
Wire Size:4 to 4 AWG
View Details
$22.99
Bussmann NON-EK Fuse Kit, Non-Cartridge, Paper
PRODUCT OVERVIEW
NON fuses with fuse tester. Contains one NON-20, two NON-30, one NON-40, two NON-60 and a fuse tester.
Product Details
Dimensions:5-29/32 in L x 6-29/32 in W x 1-1/2 in H
Includes:(1) 20 A (2) 30 A (1) 40 A and (2) 60 A and FT-2 Fuse Testers Material:Paper
Specifications:250 V
Type:Non-Cartridge
View Details
$25.99
Square D QO QO120CAFIC Circuit Breaker, AFCI, 20 A, 1 -Pole, 120/240 V, Fixed Trip, Plug Mounting
PRODUCT OVERVIEW
Combination CAFCI 3/4 in single-pole circuit breaker, designed for overload and over-current protection of an electrical system. Thermal-magnetic tripping mechanism. Designed to detect arcs that are caused by damaged, aged or improperly used wires or cords and to disconnect the power. Visi-Trip indicator to identify which circuit is out in the load center. With Time-Saver Diagnostics, advanced trip indication technology, identifying the type of fault that last occurred. 10kA interrupting rating. Uses one space per breaker. 120 VAC. UL listed. Carded.
Product Details
Current Rating:20 A
Dimensions:2-29/32 in L x 3/4 in W x 4-3/4 in H
Interrupt Rating:10 kA
Mounting Type:Plug
Number of Phases:1
Number of Poles:1
Number Of Spaces:1
Terminal Type:Pressure Contact
Trip Type:Fixed
Type:AFCI
Voltage Rating:120/240 V
Wire Size:12 to 8 14 to 8 AWG
View Details
$67.99
Federal Pacific UBIF030N Circuit Breaker, Type NC, 30 A, 1 -Pole, 120 V, Standard Trip, Plug Mountin
PRODUCT OVERVIEW
For Federal Pacific Load Centers. HACR rated. 120/240 VAC, 10,000 AIC.
Product Details
Current Rating:30 A
Dimensions:3.36 in L x 0.5 in W x 2.55 H
Interrupt Rating:10 kA
Mounting Type:Plug
Number of Phases:1
Number of Poles:1
Operating Frequency:50/60 Hz
Suitable for:Federal Pacific Electric load centers
Terminal Type:Lug
Trip Type:Standard
Type:Type NC
Voltage Rating:120 V
Wire Size:14 to 4 AWG
View Details
$42.99
Federal Pacific UBIF20N Circuit Breaker, Type NA, 20 A, 1 -Pole, 120 V, Standard Trip, Plug Mounting
PRODUCT OVERVIEW
Replacement for Federal Pacific Load Centers. Single pole SWD rated, double pole is HACR rated. 120/240 VAC, 10,000 AIC.
Product Details
Current Rating:20 A
Dimensions:3.36 in L x 1 in W x 2.55 H
Interrupt Rating:10 kA
Mounting Type:Plug
Number of Phases:1
Number of Poles:1
Operating Frequency:50/60 Hz
Suitable for:Federal Pacific Electric load centers
Terminal Type:Lug
Trip Type:Standard
Type:Type NA
Voltage Rating:120 V
Wire Size:14 to 6 AWG
View Details
$47.99
Square D HOM120CAFIC Circuit Breaker, AFCI, Combination, 20 A, 1 -Pole, 120 V, Fixed Trip, Plug Moun
PRODUCT OVERVIEW
Single-pole 1 in combination CAFCI circuit breaker is designed for arc-fault, overload and short-circuit protection of an electrical system. Designed to detect arcs that are caused by damaged, aged or improperly used wires or cords and to disconnect the power. With Time-Saver Diagnostics, advanced trip indication technology, identifying the type of fault that last occurred. White push to test button. 10 kA interrupting rating. Rated for 120 VAC. Meets Canadian Electrical code. Carded.
Product Details
Current Rating:20 A
Dimensions:1 in W x 2.98 in D x 3.13 in H
Interrupt Rating:10 kA
Mounting Type:Plug
Number of Phases:1
Number of Poles:1
Operating Temperature:104 deg F
Terminal Type:Screw Clamp
Trip Type:Fixed
Type:AFCI Combination
Voltage Rating:120 V
Wire Size:14 to 8 14 to 10 AWG
View Details
$59.99
Bussmann NON-40 Fuse, 40 A, 250 VAC, 125 VDC, 50 kA Interrupt, Melamine Body, Cartridge Fuse
PRODUCT OVERVIEW
Cartridge fuses are used to protect motors and branch circuits where higher amps or volt ratings are required. General-Purpose fuses have no time-delay and protect fuse panels, appliances and branch circuits.
Product Details
Body Material:Melamine
Current Rating:40 A
Diameter:0.81 in
Element Type:Single
Fuse Type:Cartridge
Interrupt Rating:50 kA
Length:3 in
Rejection/ Non- Rejection:Non-Rejection
Voltage Rating:250 VAC 125 VDC
Features
Protect lighting, heating and other circuits not subject to temporary surges and where available short-circuit currents are relatively low
NON one-time fuses do not have any appreciable degree of time delay and thus should not be specified in circuits where large transients or motor overloads occur
Basic protection 250 V NON Class K5 and H general-purpose, non-current-limiting, one-time fuses
View Details
$4.79
Cutler-Hammer BRP120AF Circuit Breaker, Type BR, 20 A, 1 -Pole, 120 VAC, Instantaneous, Long Time Tr
PRODUCT OVERVIEW
Cutler-Hammer Circuit Breaker, Type BR, 120 VAC, 20 A, 1 ph, 1 Pole, 10,000 A Interrupt, Instantaneous, Long Time Trip, 14 to 4 AWG Wire, Plug Mounting, Dimensions: 6 in L x 3-1/2 in W x 1-1/8 in H, Suitable for: Type BR Load Center
Product Details
Current Rating:20 A
Dimensions:6 in L x 3-1/2 in W x 1-1/8 in H
Interrupt Rating:10000 A
Mounting Type:Plug
Number of Phases:1
Number of Poles:1
Suitable for:Type BR Load Center
Trip Type:Instantaneous Long Time
Type:Type BR
Voltage Rating:120 VAC
Wire Size:14 to 4 AWG
View Details
$64.76
Jandorf 60600 Fast Acting Fuse, 2.5 A, 250 V, 100 A, 10 kA Interrupt, Ceramic Body
PRODUCT OVERVIEW
Fast acting for maximum protection. Series ABC. 1/4 in x 1-1/4 in ceramic tube.
Product Details
Body Material:Ceramic
Color:Gray
Current Rating:2.5 A
Diameter:1/4 in
Element Type:Single
Indicator Type:Non-Indicating
Interrupt Rating:100 A 10 kA
Length:1-1/4 in
Rejection/ Non- Rejection:Non-Rejection
Resistance:0.06 Ohm
Terminal Type:Ferrule
Type:Cartridge
Voltage Rating:250 V
View Details
$8.99
Jandorf 60601 Fast Acting Fuse, 3 A, 250 V, 100 A, 10 kA Interrupt, Ceramic Body
PRODUCT OVERVIEW
Fast acting for maximum protection. Series ABC. 1/4 in x 1-1/4 in ceramic tube.
Product Details
Body Material:Ceramic
Color:Gray
Current Rating:3 A
Diameter:1/4 in
Element Type:Single
Indicator Type:Non-Indicating
Interrupt Rating:100 A 10 kA
Length:1-1/4 in
Rejection/ Non- Rejection:Non-Rejection
Resistance:0.04 Ohm
Terminal Type:Ferrule
Type:Cartridge
Voltage Rating:250 V
View Details
$5.69
Jandorf 60602 Fast Acting Fuse, 4 A, 250 V, 200 A, 10 kA Interrupt, Ceramic Body
PRODUCT OVERVIEW
Fast acting for maximum protection. Series ABC. 1/4 in x 1-1/4 in ceramic tube.
Product Details
Body Material:Ceramic
Color:Gray
Current Rating:4 A
Diameter:1/4 in
Element Type:Single
Indicator Type:Non-Indicating
Interrupt Rating:200 A 10 kA
Length:1-1/4 in
Rejection/ Non- Rejection:Non-Rejection
Resistance:0.03 Ohm
Terminal Type:Ferrule
Type:Cartridge
Voltage Rating:250 V
View Details
$8.99
Jandorf 60605 Fast Acting Fuse, 8 A, 250 V, 200 A, 10 kA Interrupt, Ceramic Body
PRODUCT OVERVIEW
Fast acting for maximum protection. Series ABC. 1/4" x 1-1/4" ceramic tube.
Product Details
Body Material:Ceramic
Color:Gray
Current Rating:8 A
Diameter:1/4 in
Element Type:Single
Indicator Type:Non-Indicating
Interrupt Rating:200 A 10 kA
Length:1-1/4 in
Rejection/ Non- Rejection:Non-Rejection
Resistance:0.01 Ohm
Terminal Type:Ferrule
Type:Cartridge
Voltage Rating:250 V
View Details
$9.99
Jandorf 60606 Fast Acting Fuse, 10 A, 250 V, 200 A, 10 kA Interrupt, Ceramic Body
PRODUCT OVERVIEW
Fast acting for maximum protection. Series ABC. 1/4" x 1-1/4" ceramic tube.
Product Details
Body Material:Ceramic
Color:Gray
Current Rating:10 A
Diameter:1/4 in
Element Type:Single
Indicator Type:Non-Indicating
Interrupt Rating:200 A 10 kA
Length:1-1/4 in
Rejection/ Non- Rejection:Non-Rejection
Resistance:0.01 Ohm
Terminal Type:Ferrule
Type:Cartridge
Voltage Rating:250 V
View Details
$8.99
Jandorf 60607 Fast Acting Fuse, 12 A, 250 V, 750 A, 10 kA Interrupt, Ceramic Body
PRODUCT OVERVIEW
Fast acting for maximum protection. Series ABC. 1/4" x 1-1/4" ceramic tube.
Product Details
Body Material:Ceramic
Color:Gray
Current Rating:12 A
Diameter:1/4 in
Element Type:Single
Indicator Type:Non-Indicating
Interrupt Rating:750 A 10 kA
Length:1-1/4 in
Rejection/ Non- Rejection:Non-Rejection
Resistance:0.006 Ohm
Terminal Type:Ferrule
Type:Cartridge
Voltage Rating:250 V
View Details
$9.99
